TOLL FREE

Why did my system crash?

  1. If your system crashes, the major reason would be the bugs in the operating system.
  2. If your device experience hardware failure it tends to crash.
  3. Due to physical damage of the hardware dysfunction of the system occurs.
  4. The software can work fine only if it gets support from the hardware.
  5. Constant software tests and replacement of hardware can save the system from sudden crashes.

Check system crash

The system will display crash report and logs which will be indifferent like a command from a Command Prompt. The software programs might terminate, and the process you were doing will not be stored. Read the document below for more information.

How to check system crash in Linux?

  1. Examine all the process that is currently running in our Linux system.
  2. Go to the Console and type top output to get the report on the system’s health.
  3. Install the Htop administrator tool and monitor the performance of the system.
  4. Do an effective packet analysis to clear the traffic on the network.
  5. Use Command line network packet analysis tool on your Linux system.

How to check system crash in windows?

  1. Use an event log file that will be helpful to troubleshoot problems.
  2. Click the Windows Start button and type event in the search field.Click on the Event list.
  3. Find the event that has Error in the Level column and Application Error in the Source column.
  4. Copy the text, open the Notepad and paste the same.Save the log in .txt format.
  5. Send the file to Microsoft customer support for analysis.

How to check system crash in mac?

  1. Launch the Console app to view the Mac system logs which can help to troubleshoot problems.
  2. Use the menu Finder —> Applications —> utilities —> Console.
  3. View the list of console messages from your Mac as default.
  4. Click on Errors and Faults from the toolbar to see the error messages.
  5. Copy the log messages and open TextEdit to paste it into it.Send the report to Apple support.

What happens to the system after the crash?

  1. The operating system notices the dysfunction and whistle sup for the integrity of it.
  2. The old versions of Windows show up a blue screen of death.
  3. Your OS indirectly leads to system crash by misplacing the program in the computer’s memory.
  4. The program errors often lead to a General Protection Fault (GPF).
  5. Misplacement makes the system unstable leading to crash.
  6. A robust OS like Linux built a virtual wall around each application thus preventing other application from disrupting.
  7. The screen will be dead, or it will get freeze when the system crashes.

why does my system UI keeps crashing?

  1. If the error pops up as you launch an application, then the system crash is likely because of the application.
  2. Power off the device and do a boot up in safe mode.
  3. Hold the power key, when the device turns on press the Volume down button.
  4. Release the button until the device completes restarting
  5. Clear the cache and optimize the device using apps.

what is system crash dump?

  1. The memory dump is also known as core dump or blue screen of death in windows computer.
  2. It provides information regarding previously active application that was running before the system crash.
  3. The crash dump also creates a program log file for referencing later.
  4. Memory dumb is also caused because of memory leak that is when the system runs out of memory.
  5. The contents will be stored in case of System crash.

Debugging after system crash

Debugging the system crash is that identifying the reason behind the crash and resolving it.The operating system stores the program logs through which you can identify the cause behind the system crash.

How to debug system crash on Linux ?

  1. Make sure not to log into the system using login GUI after a system crash.
  2. Press Ctrl + Alt + F1 and enter into text-based login.
  3. Type ~/.xsession in the shell that will store the errors occurred during the previous login.
  4. Use the command mv ~/.xsession errors{,.1} to backup the error log.
  5. Login out of the shell and check the system log /var/log.

How to debug system crash on mac?

  1. Use the diagnostic tools to debug system crash on Mac.
  2. Perform a hardware diagnostic using the software installation CD.
  3. Hold on the key D to boot the device after mounting the compact disk.
  4. Run the system in safe mode by booting the Mac with the Shift key down.
  5. The safe mode disables noncritical system extension and other problematic components.

How to debug system crash on windows?

  1. Check the crashdump or minidump files that are exclusively created for debugging.
  2. Go to the file location %SystemRoot%MEMORY.DMP that shows you reason for Blue screen of death.
  3. Check if the system’s Motherboard has up-to-date BIOS.
  4. Confirm if the Advanced Configuration and Power Interface drivers are not outdated.
  5. Use registered cleaning utilities that will help to debug the system crash.
shares