TOLL FREE
  • Home
  • Simplisafe Smart Lock Installation

Simplisafe Smart Lock Installation

SimpliSafe Smart Lock is a much-needed solution to your home security system. This system always makes sure your door is locked. This smart lock works with a Single Cylinder Deadbolts. The SimpliSafe Smart Lock installation is quite simple than you think. Just follow the quick steps given below.

Simplisafe Smart Lock Installation

  • First, prepare your existing deadbolt. Navigate to the outside of your door, place the included adhesive strip over the deadbolt, and secure it in the right place.
  • Make sure not to remove the outdoor portion of your deadbolt.
  • Next, go to the inside of your door and remove the existing thumbturn.
  • After removing the existing thumbturn, remove the pre-installed mounting plate from the lock by sliding the wing latches outwards.
  • Take the mounting plate and place it on the main door.
  • Install it using the existing deadbolt screws.
  • After fixing the mounting plate securely on the door, connect the adapter that fits your thumbturn connector.
  • From the supplied adapters, pick the one that matches your thumbturn connector.
  • If your door’s tailpiece is diagonal, use the green adapter.
  • Ensure that your door is unlocked.
  • Check the latches and install the lock onto the mounting plate.
  • Secure the fixed lock by pushing the wing latches onto the mounting plate.
  • If you see any gaps between the lock and the mounting plate, unscrew the mounting plate and reattach the lock.
  • After ensuring that you have properly attached the lock, try locking and unlocking it.
  • You have now seen the first half of the SimpliSafe Smart Lock installation. Continue reading the steps to complete the installation. 
  • Next, you have to install the PIN pad. Attach the PIN pad to the outside of the door using an adhesive tape.
  • Make sure to leave a 3-inch space while attaching the PIN pad because you will need it to access the batteries in the future.
  • After installing both smart lock and PIN pad, use the SimpliSafe System’s keypad to configure the menu settings.
  • Hit the Menu button on the keypad and select Devices>Add Device>Lock.
  • Follow the on-screen prompts and complete configuring the required settings.
  • If necessary, check for updates on your keypad by selecting Menu>System Settings>Check for Updates.
  • If you have any difficulties during the SimpliSafe Smart Lock installation, click Call and our technical experts will help you resolve the problem.
shares