- Home
- Setup Canon Mg2900 Printer
How Do I Install Canon MG2900 Printer?
Just got your Canon MG2900 printer? Proceed with the steps that are given below to install Canon MG2900 printer.
- Remove all the packaging materials from the printer.
- Connect the power cord to the rear side of the printer and plug in the other end to an electrical outlet. Then, touch the Power button.
- When the Power LED lights green, lower the cartridge door.
- Unpack the toner cartridges and insert them into the respective slots.
- Push each cartridge inside until it sits into place.
- Wait until the Power LED light stops flashing.
- Raise the input paper tray and pull out the output tray and extender.
- Load a stack of paper into the input paper tray.
- Install the printer software to connect your computer and printer.
- The printer supports Wireless LAN and USB connection.
- Insert the installation disc into the CD drive of your computer.
- If you don’t have a CD drive, you can download the driver from the official Canon website.
- Click the Set Up tab and choose your region.
- Select your printer model number and choose your operating system and version.
- Click on the Download button to download the installer file.
- Run the downloaded file to open the Setup wizard.
- Choose a connection method when prompted.

- For a Wireless connection, tap the Wi-Fi button on the printer and hold it until the Alarm LED flashes once.
- Now, press the WPS button on the Wi-Fi router and hold it for a few seconds.
- When the printer connects to the network, the Wi-Fi LED and Power LED will remain constantly lit.
- For USB connection, connect a USB cable between the printer and your computer.
- To print from a mobile device, install the Canon Print Inkjet/SELPHY app from the Google Play Store or App Store app.
- Now, you can start printing from the connected devices.
- By using these steps we can execute that how do i install Canon MG2900 printer.