• Home
  • HP Neverstop Laser MFP 1202nw Setup

How To Setup HP Neverstop Laser MFP 1202nw Printer?

HP Neverstop Laser MFP 1202nw is a multifunctional laser printer that can print, copy, and scan. This printer comes with a flatbed scanner, LCD control panel, and a built-in imaging drum. You can also connect this printer to your wireless network and print remotely for any wireless device connected over the same wireless network. To know how to setup HP Neverstop Laser MFP 1202nw printer, keep reading the instructions given below.

Setup HP Neverstop Laser MFP 1202nw Printer

  • You have to unpack the printer first and take out the supplies from the product box.
  • Remove all the orange protective tapes from the printer and lift the scanner unit to remove the protective sheet from the imaging drum.
  • Close the scanner unit and insert the input tray into the correct slot.
  • Load some plain paper after sliding out the paper width guides.
  • Also, make sure to fan the paper before loading it into the tray.
  • Adjust the loaded paper with paper width guides and slide the input tray cover onto the tray.
  • Next, pull out the output tray extension and connect your printer to an electrical outlet using the supplied power cord.
  • Wait until the printer is turned on automatically.
  • Once your printer has been turned on, set your preferences on the control panel.
  • You have now seen the first half of the printer setup. To know how to set up the HP Neverstop Laser MFP 1202nw printer further, continue reading.
  • On your computer, open the default browser after ensuring that you have a stable Internet connection.
  • Visit the official HP site and enter your printer’s model number in the search panel. Hit the Enter key and wait until you are directed to the product support page.
  • Click the Software, Drivers and Firmware tab and choose your OS and its version from the link given at the top.
  • Select the required printer driver from the displayed list and click the Download button to start downloading it.
  • After completing the download, run the installer and follow the on-screen prompts.
  • When you are prompted to choose the connection type, select either USB, Wired, or Wireless connection.
  • Establish the connection between your printer and the computer by following the on-screen instructions.
  • After completing the driver installation, verify the printer functionality.
  • You have now seen how to setup HP Neverstop Laser MFP 1202nw printer.