TOLL FREE
  • Home
  • Set up HP Neverstop Laser 1000n

How To Setup Hp Neverstop Laser 1000n?

HP Neverstop Laser 1000N is specially engineered for high-volume printing. The printer is bound to give 5000 prints with a single toner. Unlike other printers with traditional cartridges, the printer can easily withhold 5,000 pages. Once the cartridge is empty, the indicator on the right side of the printer body will prompt you to add a cartridge to have more prints. The printer setup is quite easy with the HP Smart app for both Windows and Mac. Scroll down this page to know how to setup HP Neverstop laser 1000n.

How To Setup HP Neverstop Laser 1000n

Let us now see the steps on how to set up the HP Neverstop Laser 1000n printer.

  • Unpack the printer from the carton.
  • Remove the protective tapes surrounding the printer.
  • Lift the top cover and remove the orange plastic handle and the black sheet along with it.
  • Install the input tray that comes along with the printer at the bottom.
  • Place a stack of paper into the input tray and slide the cover into its place to close the tray.
  • Pull out the output extension from the top cover.
  • Remove the power cord that came along with the HP Neverstop Laser 1000N printer.
  • Connect the plug to the power source and the other end to the rear end of the printer.
  • Turn on the printer and wait for it to warm up.
  • Once the HP Neverstop Laser 1000N printer is ready, the light will stop blinking.

With the HP Smart app, you can complete the setup for HP Neverstop Laser 1000N printer.

For Mac

  • Open the Apple Store on your Mac computer.
  • Type HP Smart in the search bar and press the Enter button.
  • The HP Smart app result will be seen.
  • Select the Get button located next to the HP Smart icon.
  • The app will be downloaded to the Mac computer.
  • Open the HP Smart app.
  • Click the + icon on the app and then select your printer.
  • You can simply follow the on-screen instructions to continue the setup.
  • Select the type of connection from the list.

For Windows

  • Open the Windows Microsoft store on your computer.
  • Type HP Smart in the search bar and press the Enter button.
  • The HP Smart app will be seen.
  • Click the Get HP Smart button.
  • Open the HP Smart app after it is installed.
  • Click the + icon on the app and then select your printer.
  • Follow the on-screen commands and to know how to setup HP Neverstop laser 1000n printer.
shares