HP Deskjet 3630 Setup
How to Setup HP Deskjet 3630 Printer?
To start with your printer, you need to setup it first. The HP Deskjet 3630 is an All-In-One printer, and it can flawlessly print, scan and, fax documents. Install the printer driver on the devices through which you are going to access the printer. Read the quick steps and detailed procedure how to setup HP Deskjet 3630 printer.
Easy Guidelines For HP Deskjet 3630 Setup
The Quick Steps to Setup HP All-In-One Deskjet 3630 Printer
- Unpack the printer from the packaging and place it on a flatbed.
- Review if all the components listed in the specification are present.
- Peel off the protective tapes from the printer parts.
- Break the seal of the ink cartridge and insert them into their slots.
- Load a stack of plain paper into the input tray and pull its extender.
- Use the installation CD or download the latest version from the website.
- Follow the guidelines from the manual and complete the printer setup.
The Detailed Procedure to Set the All-In-One HP Deskjet 3630 Printer on your Computer
The first thing to do after buying a printer is to unwrap it from the cardboard box. The printer is packed using the protective tapes, pare them off from it. Take out the user manual, warranty card, and other documents from the packaging box. Using the specification list, confirm that all the printer components are included in the package.
The subsequent step is installing the ink cartridge. Take the cartridges out from the packet and strip off the orange tape covering the nozzle part. Lift the access door and slide the carriage to an end. Hold the cartridges on either side and make sure you don’t directly have physical contact with the golden colored nozzle chip. Up the input tray and align the paper width guide.
Refer to the user manual to understand more about the paper width setting. Pile a stack of plain paper into the tray. Push the cartridge further in till it gets locked into its position.
Unwind the power cord to connect the one end to the printer’s rear and other to the electrical wall outlet. To connect with a computer, use either the USB cable or establish a wireless connection. Initiate the settings of the printer.
To do so, power it up by pressing the power button. The HP DeskJet 1000 All-In-One printer completes the startup process. The hardware installation is complete now. Use an Ethernet cable of high quality and attach it to your router for implementing Internet connection to your HP printer. The package includes a setup CD, you can either it or navigate online for the newest driver.
The software should be compatible with your operating system and its current version. Your computer should be connected to a network same as that of your printer. Click Download, and the setup file gets downloaded. Double-click on the executable file with extension .exe on Windows and .dmg for Mac, a setup wizard opens. Prefer the language and click next.
The resulting screen prompt you to choose the connection type. If you are going to set a wired connection, then detach the USB cable from the devices. Reconnect the cable only when the wizard prompts. Browse the location to save the printer driver software and then click Download. Make sure to install on full-featured software so that you can use the most functionalities of the printer.
Keep calm until the download is fully complete. The time taken for the process is directly proportional to the speed of your Internet. Once the download is completed, click Finish. Print a calibration page and execute a test print. I am sure that the above-given procedure is informative, how to Setup HP Deskjet 3630 Printer.