Home
HP Deskjet 2755 Printer

How To Setup HP Deskjet 2755 Printer?

HP DeskJet 2755 is an All-in-One wireless printer that can print, scan, and copy. It comes with an LCD panel, a 60-sheet rear input tray, a 25-sheet output tray, a flatbed scanner, and supports mobile printing & dual-band Wi-Fi. To Setup Hp Deskjet 2755 printer easily, refer to the below section.

First, unpack the printer and take out the printer supplies.

Remove the protective tapes and covers from the printer.

Next, connect the HP printer to an electrical outlet using the supplied power cord.

Power up the printer by pressing the Power button on the control panel.

Open the ink access door and wait until the ink carriage halts.

Unpack the black ink cartridge first and remove the protective seal without touching the copper-colored part.

Install the black ink cartridge into the carriage and unpack the color ink cartridge.

Remove the protective tape and install it into the ink carriage.

The black ink cartridge should be fixed into the right slot and the color ink cartridge into the left slot.

After installing the ink cartridges, close the ink access door and raise the paper input tray. This is the basic step to Setup HP Deskjet 2755 printer

Load some legal plain paper into the paper input tray and adjust them with paper-width guides.
Open the output tray and extend the tray extender.
Now, install the printer software on your computer with the supplied CD-ROM.
If your computer does not have a CD drive, download the printer software from the official HP site.
After downloading the driver, open the downloaded file and run the driver installation.
Accept the terms and conditions of the installer and keep following the installer’s instructions.
When prompted, select a convenient connection type.
Establish the connection between the printer and the computer.
Continue with prompts that display on the screen to complete the installation.
If you have difficulties in Setup Hp Deskjet 2755 printer, contact our technical support team.