How to setup HP DeskJet 2622 Wireless printer
The following document will be informative to setup the HP DeskJet 2622 printer. The purpose of the printer setup is to connect the printer to a computer. Once the devices are connected, you can use your HP DeskJet printer to the fullest. Read the procedure below for detailed understanding.
The quick steps to setup HP DeskJet 2622 wireless printer to the computer
- Prepare your HP printer for installation.
- Gather the requirements and set up the printer.
- Look for the full-featured software and download the same.
- Make sure the driver suits your operating system type and its version.
- Refer to the user manual for instructions and install the software.
- Select the network type when the screen prompts you to choose.
- Confirm that your devices are connected to the same wireless network.
- Enter the network credentials and follow on-screen tips for setting up the printer.
The detailed procedure to setup the HP DeskJet 2622 printer to your computer
Before you begin to setup the HP wireless printer, gather all the requirement. You will ness a computer, a wireless router, and surge protector if needed. Your computer can be either HP or non-HP but it should be connected with an Internet. You have to be sure that both the printer and the computer are connected to the same network. The internet connection should be uninterrupted one and HP recommends using of broadband. To start the process check if your router is and the computer is on. Perform the basic setup to the printer. The primary setup procedure includes printer unboxing and powering up the computer for installation process. The first setup is completely the hardware setup of the printer. Now, install the printer driver software on the computer from which you are going to access the printer. It is always recommende3d to install the full-featured software so that you can use most of the printer issue. The full-featured software includes wireless print drivers and the HP Printer Assistant. The printer assistant has diagnostic tools that can help you to troubleshoot the printer whenever needed. Remove the USB cable connected to the computer. Go to the website an click on the driver link. Make sure that the software is compatible with your operating system and its version. The download time depends on the speed of the internet. Run the HP Easy Start application.
Choose your printer when the window prompts you to do. Scan again if you cannot find your printer in the list. If you click Continue you can choose the connection method on the resulting page. Choose Wireless network option from the list of methods. Click Continue and proceed with the process.
If the Internet connection drops in the middle, the setup cannot be completed. Turn on the wireless feature again. Gather the network credentials to connect to the Internet. The connection type can be changed once the driver is installed completely. The driver installation is done. By following the above-detailed procedure, you can successfully set up the HP DeskJet 2622 printer.