How to Setup HP Deskjet 1000 Printer

After buying a printer, the first thing to do is to unpack it from the cardboard box. The printer is shielded by the protective tapes, peel them off from it. Take out the user manual, warranty card, and other documents from the packaging box. Using the specification list, confirm that all the printer components are included in the package.
The next step is installing the ink cartridge. Take the cartridges out from the packet and strip off the orange tape covering the nozzle part. Lift the access door and slide the carriage to an end. Hold the cartridges on either side and make sure you don’t directly have physical contact with the golden colored chip. Raise the input tray and adjust the paper width guide. Refer to the manual to understand more about the paper width setting. Pile a stack of plain paper into the tray. Push the cartridge further in until it gets locked into its position.
Unwind the power cord to connect the ends to the printer’s rear and to the electrical wall socket. To connect with a computer, you can either use the USB cable or establish a wireless connection. Initiate the printer settings. To do so, power it up. The HP DeskJet 1000 All-In-One printer completes the startup process. The hardware setup is done now.
Use an Ethernet cable of high quality and connect it to your router for implementing Internet connection to your HP printer.

The next process is to install the appropriate printer driver. The package includes the setup CD. You can either use it or navigate online for the latest printer driver. The printer software should be compatible with your operating system and its version. Your computer should be connected to a network same as that of your printer.
Click on the download button, and the setup file gets downloaded. Double-click the executable file, and a setup wizard opens. Choose the language preferred and click next.
The next screen will prompt you for connection type. If you are going to establish a wired connection, then remove the USB cable connected. Reconnect the cable only when the wizard prompts you. Select the file location to store the printer software and click Download. Make sure to click on full-featured software so that you can use the maximum functionalities of the printer.
Maintain patience until the download is fully completed. The time taken for the process is directly proportional to the speed of the Internet. Once the download is done, click Finish. Print a calibration page and perform a test print. I am sure that the above-given procedure would be informative to setup HP Deskjet 1000 All-In-One printer.

How to Setup HP Deskjet 1000 Printer?