TOLL FREE

HP Officejet Pro 6978 Reset

How to Reset HP Officejet Pro 6978 Printer?

If your computer is unable to connect to your printer and issues occur during printing, then reset your printer. Sometimes, a complete factory reset can help you to find a solution for this How to Reset HP Officejet Pro 6978 issue.

How to Reset HP Officejet Pro 6978 Printer

Quick Guidelines For How to Reset HP Officejet Pro 6978 Printer

Steps Used to Reset HP Officejet Pro 6978 Printer

  1. Turn off the printer, router, and the computer.
  2. Ascertain that there is no power supply to the product.
  3. Unlink the power cable from the product and wait for 30 seconds.
  4. Reconnect the power cable after 30 seconds.
  5. Turn on the printer while you press and hold power and cancel buttons for 10-20 seconds.
  6. Release both the buttons once the attention light turns on.
  7. Wait for the printer to turn on automatically; if not use the power button to turn it on.
  8. Try test printing a document to check the status of the printer.

Read More About How to Reset HP Officejet Pro 6978 Printer

If you are facing issues with your computer and are unable to connect to the printer or router then try resetting your printer. A hard reset helps to resolve many printer related issues.

Get expert advice to reset your printer for a better result. Turn off the printer, if it is turned on. Unplug the power cable from the printer. Unplug the power cord directly from the rear of the printer while the printer is still turned on.

Confirm that there is no power supply to the printer. Unplug the other end of the cord from the power source. Unlink the power cable for 30 seconds. After 30 seconds, re-attach the power cable. Connect the power cord directly to the back of the printer.

It is recommended by experts to plug the printer’s cable directly to a wall outlet to ensure a constant supply of power. Sometimes, plugging it into a surge protector will supply an appropriate amount of electricity to the printer.

Power issues can cause printing problems. Hold the Power and Cancel buttons for 10-20 seconds. Wait for the printer to power on. If the printer doesn’t, turn on automatically, then press the power button to power on it.

Wait for the printer to be idle and silent. Once the printer reaches a stable state, perform a test print. Try making a photocopy before connecting any other cables to the printer.

Finally, connect the other cables to the printer. After the printer setup is done, downloads and install the printer software from the manufacturer’s site. Follow the on-screen instruction to complete the setup. For more guidelines How to Reset HP Officejet Pro 6978 Printer Contact with Our Expert’s.

shares