HP Deskjet 2130 Reset
How to Reset HP Deskjet 2130
How to Reset HP Deskjet 2130 printer is done if the printer encounters certain hardware issues. You might also experience the following such as the printer not printing, print job stops unexpectedly etc. Sometimes resetting your printer can help you clear printer issues like carriage jam errors.
Easy Guidelines For How to Reset HP Deskjet 2130 Printer
Quick Steps to Reset the HP Deskjet 2130 Printer
- Power on the printer if it is not already on.
- Wait until the printer is idle and silent before you continue.
- Detach the power cord from its rear when the printer is turned on.
- Unplug the power cord from the wall socket and wait for 60 sec.
- Link the power cord back into the wall outlet.
- Relink the power cord, and turn on the printer.
- Wait for the printer to remain idle and silent before you proceed.
- Try to print, and check the printer status.
Read More About How to Reset the HP Deskjet 2130
Performing a hard reset helps you to resolve printer issues like paper jam, connection error, troubleshooting, unable to connect to the printer, etc. Get the expert advice if you still find it difficult to perform printing operations with the printer. Unplug the power cord from the printer when the printer is on.
Confirm that there is no power supply to the printer. Unlink the other end of the cord from the power source. Unlink the power cable for 30 seconds. After 30 seconds, re-connect the cable. Connect the power cord directly into the back of the printer.
It is recommended by experts to plug the printer cable to a wall outlet directly in order to ensure a consistent level of power supply. Sometimes, plugging it to a surge protector or battery backup lets you receive a correct amount of electricity if not received by the printer.
Power issues can cause printing problems. Press and hold the Power and Cancel buttons for 10-20 seconds. Wait for the printer to power on automatically. If the printer doesn’t turn on automatically, then press the power button to power it back on.
Wait for the printer to be idle and silent. After the printer reaches a stable state, try a test print. Try making a photocopy before connecting any other cables to the printer.
Finally, connect any other cables to the printer after the printer setup is complete, downloads & install the printer software from the manufacturer’s site. Go with the on-screen instruction to complete the setup. For More How to Reset HP Deskjet 2130 Printer Guidelines Connect with Our Expert’s.