TOLL FREE
  • Home
  • Installing Canon Mg3600 Printer

How To Install Canon Mg3600 Printer?

The Canon MG3600 Printer is an excellent multifunctional device, which gives high-quality outputs. To access this printer from your computer, you need to install the driver specific only for it. You can either use the setup CD provided with the printer or download the driver from the official Canon site, whichever is feasible. Install Canon Mg3600 printer by following the guidelines given below.

  • Make sure to connect your printer to a power source before installing the software.
  • Once you have made all the hardware connections, you can proceed to install Canon Mg3600 printer and software.
  • Insert the installation disc into the CD drive of your computer.
  • Otherwise, go to the official Canon website from your web browser.
  • Select Support and enter the model number of your printer in the Search section.
  • On the Canon MG3600 printer’s page, select the Drivers & Downloads tab.
  • Choose your operating system and version. Then, select the required driver for your computer. Then, click Download.
  • Double-click on the downloaded installer file to start the installation.
  • Click the Start Setup button on the initial install Canon Mg3600 printer screen and select the connection method when prompted.
  • Choose either Wireless LAN Connection or USB connection. Then, click Next.
  • For a Wireless LAN Connection, make sure to configure your wireless router before starting the connection. Also, keep the router turned on.
  • Turn on the printer and tap the WPS button on the wireless router when prompted by the installer.
  • Tap the Wi-Fi button on the Canon printer and hold it for a few seconds until the Power LED light blinks.
install Canon Mg3600 printer

  • Press the Black button and touch the Wi-Fi button to get connected to the network.
  • When the printer is connected to the wireless network, the Wi-Fi LED flashes, and the Power LED remains continuously lit.
  • If you want to establish a USB connection, wait for the prompts.
  • When prompted to connect the USB cable, connect the cable to the rear side of the printer and plug in the other end of it to your computer.
  • Complete the driver installation by following the instructions on the screen.
  • After the completion process of install Canon Mg3600 printer, you can print and scan from your computer.
shares