• Home
  • Canon Printer Error E1970000

How To Fix Canon Printer Error E1970000

Error codes occur for a specific reason. When you figure out the exact cause, you can solve your problem in the best possible way. This article covers some techniques to fix the Canon printer error code E1970000. Try out each technique and see if it works for you.

How To Fix Canon Printer Error E1970000

Cancel The Print Jobs

  • A few users have reported that they have fixed the error code E1970000 by canceling the previous print jobs. Therefore, you can give it a try.
  • To do it, search for Control Panel and select it.
  • Choose Hardware and Sounds> Devices and Printers. Here you can find all the devices and printers connected to your computer.
  • Right-click on your Canon printer and select See what’s printing.
  • Go to the Printer tab in the small window that opens up and choose the Cancel All Documents option.
  • Now, ensure that the error code is fixed.

Uninstall And Reinstall The Printer Software

  • In most instances, reinstalling the software can help you fix your printer problems.
  • To do it, navigate to the Device Manager section on your computer and uninstall the printer driver.
  • Reinstall the driver and then ensure your problem is fixed.
  • If this doesn’t work, visit Canon’s official website and enter your printer model. Download the updated driver compatible with your OS and install it on your computer. Hopefully, this method should work.

    Power Cycle Your Canon Printer

    A simple power cycle can help you rectify many printer problems efficiently. Try it whenever you encounter the error code E1970000 on your Canon printer. Follow these instructions to proceed further.

    • Turn off your Canon printer and disconnect the power cord from its rear port and the electrical outlet.
    • Leave your printer disconnected for a minute.
    • Reconnect the power cord to your Canon printer and turn it on.
    • Now, check if the error code E1970000 is fixed.

Replace The Board

  • When there is a Serial Communication error between the DC controller and feeder drive board, you will end up with the E1970000 error code.
  • In that case, the only solution to fix the trouble is by replacing the boards.

We hope the above troubleshooting solutions have helped you fix the Canon printer error code E1970000. If you still cannot solve your problem, reach our technical experts for assistance. For this purpose, we have provided a call option on this page.

Call us