- Home
- HP Deskjet 2130 Wifi Setup
How to Connect HP Deskjet 2130 to Wifi?
How to Connect HP Deskjet 2130 to Wifi, turn on a router and set up a broadband internet connection. Change the printer network settings to default and then connect your printer to the router network. Also, connect your computer to the network and install the print driver and software.
Quick Guidelines For HP Deskjet 2130 Wireless Setup
Simple Steps to Connect HP Deskjet 2130 Printer to Wi-Fi
- Connect the HP Deskjet 2130 printer to a stable power connection.
- Press the Cancel Key to turn on the printer.
- Press and hold the Cancel and Wireless keys for five seconds.
- Release both the buttons to reset the network settings.
- Enable a Wireless connection on your printer.
- Press the WPS button on the router panel to link the printer to the router network.
- Install the HP Easy start application and add the printer to the software.
- Wait until the software links your printer to the network and then install the printer software.
Procedure to Connect HP Deskjet 2130 Printer to Wi-Fi Connection
Your computer and HP Deskjet 2130 printer must be connected to a wired or wireless network connection to download the print drivers and software. To connect your printer to the router’s network, check the below article and learn some easy steps to set up the wireless connection.
Configure a network connection on your router with broadband internet access. Secure your internet with a wireless network name and password. Ensure you have placed your computer and printer within the wireless range of the network router. Be sure not to place any devices that emit radio waves or signals.
Connect your printer to a stable alternating current source and wake up the printer from the inactive mode by pressing the Cancel icon on the printer panel. Once the printer wakes up, leave it idle for a few minutes until it warms up. In the meantime, turn on your computer if it is not active already and connect it to the router network connection.
Press the Cancel and Wireless icon/button on the printer panel and hold for a time of 5 seconds. Then release it to reset the default network settings. Now press the Wireless icon on the printer operator panel. The blue light on the printer panel near the wireless icon starts blinking. The printer starts a timer for about two minutes approximately. Press the WPS button your router before the timer ends.
When the printer is connected to the wireless router’s network, the blinking blue light stops blinking and remains lit. If the wireless light still blinks, check and ensure the printer is in active mode and near the router signal. Try the connection steps again to connect to the network.
After connecting your printer to the router’s network, go to our site from your network connected computer. Search for the latest version of print driver software for your printer model and download the driver file to your computer. Run the software as an administrator. Follow the instructions and continue with the How to Connect HP Deskjet 2130 to Wifi and installation steps. Choose the connection type as Wireless and then connect the USB cable between the printer and computer.
