- Home
- Ethernet Connected But No Internet Mac
Ethernet Connected But No Internet On MAC – Resolved
If Ethernet Connected But No Internet on Mac, proceed with the steps that are given below to fix the issue.
‘Connected but no internet on your computer’ is a common status message that many people receive when trying to connect their Mac computers to the internet.
If you’re also receiving the same message or a similar one, such as, ‘Ethernet connected but no internet on Mac,’ then this article is for you. Before going to the troubleshooting solutions, let’s see why you receive this message.
This message says that your Mac is connected to the modem or router, but the device can’t reach the internet. This issue may occur due to several reasons, but in most cases, it pops up if your internet connection is unstable or poor.
So, first, ensure that your router or modem is connected to a stable internet connection. The problem can also occur if:
- You’re using an incompatible or damaged Ethernet cable.
- You have connected the Ethernet (network) cable to the wrong port.
- Third-party security software installed on your computer is blocking the network.
Ethernet Connected But No Internet On MAC – Troubleshoot
Carry out the instructions given below to fix the current internet issue on your Mac:
- Check whether the Ethernet cable is defective. If so, replace the cable.
- Ensure that there are no issues with the connected port of your Mac device.
- Restart your Mac device and the router you’re using. If the restart process doesn’t fix the problem, re-add your Ethernet service.
- To do so, open the System Preferences screen.
- Now, click the Network icon and select the USB 10/100/1000 LAN connection or Ethernet from the left panel.
- Click the “-” icon at the bottom-left corner of the window. Then, click Yes.
- Now, disconnect your Ethernet cable from the Mac device and reconnect it.
- Click on the “+” icon and choose the interface as Ethernet from the drop-down list. Enter a service name and click Create.
- Check if the “Ethernet is connected, but no internet on Mac” issue is resolved. If not, renew the DHCP lease. To do so, click Network in the System Preferences window. Choose Ethernet, click the Advanced tab, and select TCP/IP. Then, click on the Renew DHCP Lease button.
- When prompted for confirmation, click on the Apply button.
- If the issue persists, go back to the System Preferences window and select Network.
- Create a new location and remove all other connections except Ethernet.
- Now, select the Renew DHCP Lease option again under TCP/IP in the Advanced section.
- Open your browser and check whether you can access the internet.
- If the issue persists, use the Network Diagnostics tool to resolve the problem. Go to the System Preferences window, choose Network, and select your network on the opened screen.
- Click Assist me and navigate to the Diagnostics section.
- When the Network Diagnostics window appears, you can verify the Ethernet connection.
- The utility is capable of repairing problems automatically.
- If you find any connection issues, continue with the instructions on the screen to resolve the same.
- If your Mac still can’t connect to the internet, reset the router to fix the problem.
Bottom Line
We believe that the troubleshooting solutions provided on this page have helped you in resolving the ‘Ethernet connected but no internet on Mac’ issue. Contact us if not or if you need real-time assistance in fixing this problem.
Our support team will assist you in resolving this network issue easily. Go ahead and make use of the call option we’ve provided on this page to connect with our support team.
