Menu
  • Home
  • Fixing: Canon Printer Error Code

Canon Printer Error Code B200

The Canon printer error codes indicate the issue with your printer. Each error code has its own meaning. You have to gain knowledge about the code in order to understand the problem and resolve the same. Some of the error codes of Canon would be E16, E13, U163, etc. These error codes refer to ink cartridge issues. The most common error code of Canon printer would be B200. Read the document and learn more about Canon Printer Error Code B200.

Canon Printer Error Code B200

Easy Guidelines For Canon Printer Error Code – B200

Step by Step Guide to Resolve Canon Printer Error Code – B200

  1. Power off the Canon printer and detach the cable from the socket.
  2. Disclose the Canon printer’s cartridge access door.
  3. Remove the cartridges by gently unlocking it from its position.
  4. Make sure not to have direct contact with the nozzle part of the cartridge.
  5. Remove and clean the printhead contacts using a damp cloth.
  6. Insert the printhead and ink cartridges.
  7. Power up your Canon printer and the B200 error code may have gotten fixed.
1
Canon Pixma B200 Error Code
2
How to Fix Canon Printer Not Printing
3
Canon Printer Paper Jam Error
4
Error Message uo43 – Canon MP830

An Elaborate Procedure for Resolving the Canon Printer Error Code, B200

  • The Canon printer error code B200 occurs due to specific hardware failure in your printer or printhead area. By restarting the printer, you can solve the Canon B200 error. Turn the Canon printer off and disconnect the power cord.
  • Open the printer cover and check for protective tape or packaging material. If found any, remove them. Check the internal part of the printer to confirm that there are no strange objects in the printer. Close the printer’s cover and reconnect it to the power source. Check the display screen of the printer. If this hasn’t resolved the issue, contact the Canon repair center.
  • Check and clear if any packaging material is found in the input tray, cartridge access door, scanner unit, output tray, and cartridges. In some cases, you might observe an error which requires you to contact the service center. Your printer must be serviced if the control panel screen displays you the Canon printer error code.
  • Sometimes there can be an issue with the printhead too. The printhead is a critical component and plays a significant role in printing your documents.
  • One of the main reasons for printhead errors is no maintenance. Dust and other particles might get accumulated if not cleaned regularly. Hence, it is advised to clean the component on a regular basis.
  • Lift the top cover of the printer. The cartridge carriage will automatically elevate. Take out all the cartridges from the cradle. Lift the lever situated beside the cradle to remove the printhead. After lifting the lever, slowly remove the printhead. Re-insert the printhead back into its position and ensure that the lever is locked.
  • Install all the cartridges back into their respective slots and make sure the cartridge door is not open. After closing the door, you can ensure that the printer is ready. Detach the printer cable from the power outlet and leave it unplugged for at least 5 minutes. This way, the printer starts to cool down and the remaining electrical energy is also eliminated from the machine. Now, re-insert the printer. Now for the last step, clean the cycle or perform an extensive nozzle check if you still face an Canon Printer Error Code B200, Contact With Our techie.
Copyright © 2023 - 2024 howtosetup.co | All Rights Reserved.
HOWTOSETUP.CO
Call us